top of page

Receipt Checks and Fitting Instructions

Upon receipt of your Roman blind, it is important to unpackage it as soon as possible, this will allow the fabric to breathe outside of its packaging and will ensure that it does not become creased (it will have been lovingly pressed by our sewing room before departure, though some creasing is to be expected during delivery and should gradually drop out once hung).


We will send the correct amount of brackets you need to fit your roman blind, along with any screws and wall plugs required. You should space these evenly along the headrail.

Chain Operated Roman Blind Fitting Instructions


Your made to measure Roman blind is supplied complete and ready to hang on the brackets supplied, Please read the following instructions carefully before fitting your blind.


The brackets are designed to be used as either top fix (top of the /window recess or ceiling) or face fixed (wall or window frame). In order to provide the stability for fixing or removing the rail it is essential that the brackets are fixed securely.


Attaching Brackets

Please note when attaching brackets to their fixings allow a minimum of 2cm from the ends of the headrail to avoid obstructing the end mechanism. For larger blinds extra bracket(s) will be supplied and should be fitted evenly between the end brackets


To attach blind to the brackets you have just fitted simply raise the headrail into position as illustrated. When fitting the headrail ensure that the two hooks on the brackets are hooked underneath the lip in the headrail.


Securing headrail to bracket

Press the headrail in place with a slight upwards pressure, then push the swivel clamp to the left which will lock the headrail correctly in place. The fabric on our chain operated Roman blind system can be attached and detached to the headrail for perfect alignment


Using the control chain to operate the blind

Pulling gently on the chain in one direction will lower the blind and in the other it will raise. It is possible on certain blind mechanisms you can lower the blind and by continuing to pull the chain in the same direction the blind will raise again – you may notice that the blind will pull up unevenly if you do this, so you should reverse the direction you are pulling the chain in, until the blind lowers and then raises again, this time evenly.


Safety Features

The Blind has several `Child Safety` feature designed to fail under particular criteria, preventing  accidents and protecting the blind. Should these fail as designed under certain load conditions, they can easily be put back into place. The blind should contain a spring toggle which may come off and Blind Clips which will part, but clip easily back together.

Drive Wheel

The blind headrail will also contain a removable drive wheel, which will fail under load criteria, but can be placed back into place easily as shown.

Call us if you require any assistance !

bottom of page